How To Use Cleaning Filter - Prime 501-SV User Manual

How to use Cleaning Filter (Citric Acid Filter)
2nd Filter
Cleaning Filter
Flush
PURIFIER : 5~10 minutes
26
2nd Filter 2nd Filter
Cleaning Filter Cleaning Filter
Rubber for fixing
Acidic Water outlet tubing
Press-OFF
6~8 hours
PURIFIER : 15sec
Cleaning Filter 2nd Filter
How to use Cleaning Filter (Citric Acid Filter)
VERY IMPORTANT
When cleaning your water ionizer, be sure to always use the Purified water level only!
Do not use any other level while cleaning or damage could occur.
1
Turn off power to the ionizer by pressing the circle side of the power switch located at the bottom of the ionizer.
Remove the 2nd filter(Blue color label) cover located on the right side when looking at the back of the ionizer.
2
Remove the 2nd filter by twisting the filter and then lifting it out of the ionizer.
3 Remove the black cap packaging cover from the bottom of the Cleaning Filter.
4 Press down and twist the filter until it stops.
Replace the cover and turn the power switch back on.
5
Apply water pressure, press the "ON/OFF" button and produce water for 15 seconds.
6
Press the "ON/OFF" button to stop extraction.
For counter top applications, remove the acidic tube from the sink and fasten it to the ionizer ensuring that the
cleaning solution will not leak out of the ionizer.
Now let the unit sit for a minimum of 6-8 hours or for best results, overnight.
7
The unit is full of a citric acid solution that will take many hours to break down the scale that has built up in your unit.
Letting it sit in the unit for over a 6 hour period is okay and will not harm the ionizer.
Once the unit has sat for the recommended time, (leaving scaling filter in place) unfasten the acidic tube from
8
the ionizer and place it back in the sink (for counter top applications) and then press the center "ON/OFF" button.
Let the unit extract water for 3-5 minutes.
This step will purge all of the citric solution, along with any scale, out of the machine.
The cleaning process is now complete.
9
Remove the Cleaning Filter and throw it way and reinstall a 2nd filter(Blue color label).
CLEAN YOUR IONIZER AT LEAST ONCE PER 3~6 MONTHS
In order to maintain the highest performance level of your water ionizer,
we recommend you perform this simple cleaning procedure at least once 3~6 year,
whichever comes first.
This procedure will remove mineral build-up from the electrodes and membranes
in the electrolysis chamber to ensure optimal ionization power of your water ionizer
for many years.
Cleaning Filter
(Citric Acid Filter)
27