Installation - Triax TR60 User Manual

User manual

1.7 Installation


Press the "MENU" button to enter main menu.

Press "UP"or " DOWN " button to highlight "Installation",
press
"RIGHT" button to enter the Installation menu.

Press "UP" or "DOWN" cursor button to highlight the desired
item
and press "OK"button to enter the sub-menu .

Press "EXIT" button to exit.
Auto Search:
Auto search is a kind of intelligent and convenient mode of programs
searching, which covers programs
of all frequent points of target countries or regions.
Press cursor button to highlight "Auto Search", then press "OK" button
to
enter into Auto Searching page. The STB will scan all programs one by
one under frequency points of current countries or regions selected
automaticlly.
If any program is detected and the scanning process is finished, the
STB
will exit the scanning page and save the programs. At the same time
return to play them.
During scaning, press "EXIT" button to stop and exit scanning.
Manual Search:
If you understand much about digital TV and know the frequency of
the program or if you want to scan
the program at any frequency required, you can select manual search,
which can save your much time.
Press cursor button to highlight "Manual Search", then press "OK"
button
to enter into Manual Searching page. The STB will scan all programs
one
by one under frequency points of current countries or regions selected
automaticlly.
Prior manual search, you need to configure relevant parameters
including:
(1).Frequency(KHz): the default frequency is settled by different
country,
you can input relevant digitals to modify it.;
(2).Bandwidth: the default value of bandwidth is settled by different
country while you can set it to 6MHz,7MHz,8MHz.;
(3). Press "OK" button after configuration of parameters to start
manual scan.
Channel Filter:
All of channels or only unencrypted channels are set to be searched by
selective settings
Country:
Many targets countries and regions are set to be searched by
selective settings
LCN:
Enables/Disables LCN
Active Antenna:
Enables/Disables Antenna
Channel Filter:
LCN:
Active Antenna
All Channels/FTA Only
Off/On
Off/On
9 EN