Table of Contents
Advertisement
4.4 Date Time
Date Time Mode:
Auto/Manual
Date/Time:
In "DateTime Mode" Manual mode, you can set date and time manually. Highlight "Date" or "Time",press "Right" button
to select,then set by the numeric button.
In "DateTime Mode" Auto mode, you can set Time Zone. The GMT offset range is "Auto/-12:00 ~ +12:00", increasing
Time Zone:
half hour progressively.
Country Region:
Country Region
Day Light Saving:
On/off
4.5 Factory Reset
This menu allows you to re-set the device back to factory settings, clear all existed channels. You are asked to input the password by pressing
the numeric buttons. (The default password is "0000" or "1234")
4.6 Upgrade
We offer the functions for user to upgrade software version by USB/Card Upgrade.
USB /Card Upgrade:
Highlight "USB/Card Upgrade", press "RIGHT" button to enter file list, select the upgrade file, then press "OK" button to upgrade
software.
4.7 Version
This menu can display the informations of the STB.
4.8 Auto Standby
This option allows you to enable or disable Auto Standby.The STB will switch to standby automatically when it doesn't receive commands from
the remote control for 1/2/3 hours.
Auto Standby:
Off(Disable Auto Standby)
1hr
2hr
3hr
EN
Note:
To avoid the automatic switch off, set Auto Standby to Off.
14
User manual
Advertisement
Table of Contents
