ADEMCO 6220 User Manual page 20

A A A A A UT UT UT UT UTO SEQUENCE NUMBER O SEQUENCE NUMBER O SEQUENCE NUMBER is the next O SEQUENCE NUMBER O SEQUENCE NUMBER
Auto Seq#
parameter. Choices are:
NO NO - don't autoprint sequence number NO NO NO
after CR
YES - do autoprint sequence number after YES YES YES YES
CR
Zero ZERO is the next parameter. Choose how you ZERO ZERO ZERO ZERO
want the zero character to look in your print-
outs. Choose between 0 0 0 0 0 and 0 0 0 0 0 .
POUND SIGN POUND SIGN POUND SIGN is the next parameter. Choose to
Pound Sign POUND SIGN POUND SIGN
show pound as # # # # # or as the British sterling pound
symbol £ £ £ £ £ .
_Underscore _UNDERSCORE _UNDERSCORE _UNDERSCORE is the next parameter. Choose _UNDERSCORE _UNDERSCORE
which symbol the same ASCII code will print,
an _underscore or a
BUSY INVER BUSY INVER BUSY INVER BUSY INVERT T T T T is next. Choices are: BUSY INVER
Busy Invert
NO NO NO NO NO - voltage will be in a high state until the
unit is busy then voltage level goes low.
YES - YES -
YES - YES - voltage will be in a low state until the YES -
unit is busy then voltage level goes high.
ONLINE/OFFLINE ONLINE/OFFLINE is next. Choices are: ONLINE/OFFLINE ONLINE/OFFLINE ONLINE/OFFLINE
Online/Offline
YES YES YES YES YES - enables the rocker switch to turn the
printer offline.
NO NO
NO - disables the ONLINE/OFFLINE ability. NO NO
EXT CH SET EXT CH SET EXT CH SET EXT CH SET EXT CH SET is next. This stands for Extended
Ext. Ch Set
Character Set. Choices are:
15
left arrow.
YES YES YES - Allows you to use hexidecimal YES YES
The choice to use the
numbers above 80 (true only for 8 data bits.)
extended character set is
available only when 8 data
NO NO NO NO NO - Disables the Extended Character Set
bits are chosen.
ability.
PRINT READ PRINT READ PRINT READ PRINT READ PRINT READY Y Y Y Y is next. Choices:
Print Ready
YES YES YES YES - Prints R R R R R eady YES
NO - Disables printing R R R R R eady NO NO NO NO
W W W W W ARNING - ARNING - If you choose NO ARNING - ARNING -
ARNING -
of the rocker switch down for 4-6 seconds to
access the setup menu. Begin timing when you
plug the unit and the red light comes on. The
paper feed motor does not run upon power up
when R R R R R eady
Set Clock The next item in the Setup Menu is SET CL
With the printer in the setup menu and with SET
CL CL CLOCK CL CL OCK OCK OCK OCK as the last item printed, if you press OK
(right side) the printer will print the following:
The feature is available only
on units with the time/date
option installed.
The printout shows the year currently in
memory. The 9 9 9 9 9 is reversed (white on black) to
show the position of the cursor. This is the num-
ber which will be incremented if NEXT
is pressed. If the number is correct press OK
(right side) and the following is printed:
eady eady eady eady. . . . . . . . . . . . . . . upon power up.
eady eady eady eady. . . . . . . . . . . . . . .
NO, hold the left side NO NO
NO
eady eady. . . eady eady . . . . . . . . . . . . is disabled.
SET CL SET CL
SET CLOCK SET CL
NEXT (left side) NEXT NEXT NEXT
OCK OCK. . . . . OCK
OCK
SET SET SET
SET
OK OK OK OK
OK OK
OK OK
1 1 16