Reset Seq; Communication - ADEMCO 6220 User Manual

Mag The last parameter is MA
refers to the size of printed type from your
printer. Your choices (with examples) are:
NONE
DOUBLE WIDE
DOUBLE HIGH
DOUBLE WIDE/HIGH
After you choose one of the magnifications, the
printer will print R R R R R eady
out of the configuration menu and the setup
menu and is ready to print.
Custom The next setup menu item after CONFIGURE
CUSTOM. CUST CUST CUST CUST
and with CUST
you press OK (right side) the printer will print
the following:
If you press OK
custom setup. A sample follows:
13
MA MA GNIFICA GNIFICA TION TION
MA MAGNIFICA GNIFICA GNIFICATION TION TION. This
eady eady eady eady. . . . . . . . . to show the printer is . . . . . .
CONFIGURE CONFIGURE CONFIGURE CONFIGURE is
OM. With the printer in the setup menu OM. OM. OM.
CUST CUSTOM. . . CUST OM. . . OM. . . as the last item printed, if OM. . .
CUST OM. . .
OK OK the printer will print the current OK OK

RESET SEQ#

RESET SEQ# is the last setup menu item. This RESET SEQ# RESET SEQ# RESET SEQ#
Reset Seq#
menu item lets you reset the sequence num-
ber. This number is the number of print trans-
actions since the last reset.
With the printer in the setup menu and with
RESET SEQ# RESET SEQ#
RESET SEQ# as the last item printed, if you RESET SEQ# RESET SEQ#
press OK
be reset to zero and the printer will print READ
showing it is no longer in the setup menu and
that the printer is ready to print.
To skip resetting the sequence number to zero,
press NEXT
Unplug and replug in the printer to return to
printing mode. READ

Communication

Model 6220S This section shows the cable differences in the
models of the 6220 series printer and the con-
RS-232 Serial Version
trol codes and communication protocols.
OK (right side) the sequence number will OK OK OK
NEXT (left side). CONFIGURE NEXT NEXT CONFIGURE is printed. CONFIGURE CONFIGURE
NEXT CONFIGURE
READY Y Y Y Y is printed. READ READ READ
READY Y Y Y Y READ READ READ
18