SpaDealers arctic User Manual

MultiTub
User's Guide
WARNING!

Read the technical instructions before installing the bath

Read the users instructions before using the bath

Do not bring sharp objects into the bath

Contact the seller if the colours appear to be changing under or on top of the coating

If a leakage appears contact the seller immediately.

All electrical work should be performed by a qualified electrician

Do not leave children in the bath without supervision

Do not sit with your back or head against the skimmer

For the MultiTub Arctic, a mains connection of 230V, 1x16A, 2x16A with Ground Fault Current Interrupt (GCFI) is required. A
service switch, which is closely installed to the electrical connection, is recommended.

ATTENTION! If the hot tub will be integrated e.g. into a terrace it is necessary that the access is not obstructed in any way
order to be able to service it. Service hatch and outer panel should be removable without difficulties.

If automatic dispensers (floating, etc.) are used, careful adjustment should be made to avoid incorrect dosage. Follow the
recommendations in our instructions.

The circulation pump also generates heat and if it is running a long time (e.g., continuous filtration TM) it can raise the
temperature by several degrees in one day since the tub is well insulated.
 Check the quality of the water, as well as temperature and function, regularly, don't leave the spa unmonitored for long time
periods.
Arctic