Sharp 28LF-92EES Service Manual page 46

AK - 45
CHASSIS
FULL HORZ_POS
It's used to adjust the horizontal position of 16:9 mode (full mode).
FULL HORZ_AMPL
It's used to adjust the horizontal amplitude of 16:9 mode (full mode).
BRIGHT MODE BRIGHTNESS
It's used to adjust the brightness value of bright mode.
BRIGHT MODE COLOUR
It's used to adjust the colour value of bright mode.
BRIGHT MODE CONTRAST
It's used to adjust the contrast value of bright mode.
SOFT MODE BRIGHTNESS
It's used to adjust the brightness value of soft mode.
SOFT MODE COLOUR
It's used to adjust the colour value of soft mode.
SOFT MODE CONTRAST
It's used to adjust the contrast value of soft mode.
PERSONAL MODE FACTORY SETTING BRIGHTNESS
It's fixed.
PERSONAL MODE FACTORY SETTING COLOUR
It's fixed.
PERSONAL MODE FACTORY SETTING CONTRAST
It's fixed.
SCINC FOR PANORAMIC MODE
scaler1 coefficient, this scaler is compressing the signal.
SCINC1 FOR PANORAMIC MODE
scaler2 coefficient, this scaler is expanding the signal.
VOLUME AFTER APS
It's used to adjust the volume level after APS.
VERTICAL SCROLL
It's used to adjust the step width for scroll function.
14:9 HORIZONTAL START
It's used to adjust the horizontal blank start position for 14:9 mode.
14:9 HORIZONTAL STOP
It's used to adjust the horizontal blank stop position for 14:9 mode.
4:3 RGB HORIZONTAL AMPLITUDE
It's used to adjust the horizontal amplitude in 4:3 mode for RGB signals.
4:3 RGB CUSHION
It's used to adjust the cushion in 4:3 mode for RGB signals.
14:9 RGB HORIZONTAL AMPLITUDE
It's used to adjust the horizontal amplitude in 14:9 mode for RGB signals.
30