Dehumidifying Operation; Timer Operation - Ideal Air DUAL MINI-SPLIT Manual

3
ON/OFF
1
MODE
TEMP
FAN
SLEEP
TURBO SELF
CLEAN
ON/OFF
MODE
TEMP
FAN
SLEEP
TURBO SELF
CLEAN
2
SILENCE
FP
TIMER
ON
TIMER
OFF
SWING DIRECT
LED FOLLOW
ME
SILENCE
FP
TIMER 1
ON
TIMER
2
OFF
SWING DIRECT
LED FOLLOW
ME

DEHUMIDIFYING OPERATION

Ensure the unit is plugged in and power is available. The
OPERATION indicator on the display panel of the indoor unit
starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the desired
temperature. The temperature can be set within a
range of 62º F~86º F in 1º F increments.
3. Press the ON/OFF button to start the air conditioner.
In the Dehumidifying mode, you cannot switch the
fan speed. It has already been automatically controlled.

TIMER OPERATION

Press the TIMER ON button can set the auto-on time of the unit.
Press the TIMER OFF button can set the auto-off time of the unit.
TO SET THE AUTO-ON TIME.
1. Press the TIMER ON button. The remote control
shows TIMER ON, the last auto-on setting time
and the signal "H" will be shown on the LCD
display area. Now it is ready to reset the auto-on
time to START the operation.
2. Push the TIMER ON button again to set desired
auto-on time. Each time you press the button, the
time increases by half an hour between 0 and 10
hours and by one hour between 10 and 24 hours.
3. After setting the TIMER ON ,there will be a one
second delay before the remote control transmits
the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal
"H" will disappear and the set temperature will
re-appear on the LCD display window of the remote.
TO SET THE AUTO-OFF TIME.
1. Press the TIMER OFF button. The remote control
shows TIMER OFF, the last auto-off setting time
and the signal "H" will be shown on the LCD
display area. Now it is ready to reset the auto-off
time to stop the operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button, the
time increases by half an hour between 0 and 10
hours and by one hour between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a one
second delay before the remote control transmits
the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "H "
will disappear and the set temperature will
re-appear on the LCD display window of the remote.
8
NOTE: