Ideal Air DUAL MINI-SPLIT Manual page 4

1
ON/OFF
2 MODE
3
FAN
4
SLEEP
5 TURBO SELF
CLEAN
6
SILENCE
FP
TIMER
ON
TEMP
TIMER
OFF
SWING DIRECT
LED FOLLOW
ME
7 UP BUTTON (
Push this button to increase the indoor
temperature setting by 1º F increments to 86º F.
DOWN BUTTON (
Push this button to decrease the indoor
temperature setting by 1º F increments to 62º F.
Temperature control is not available
in FAN mode.
7
8
Press and hold UP and DOWN buttons
together for 3 seconds will alternate
the temperature display between the
9
ºC and ºF scale.
bk
8
SILENCE/FP BUTTON
bl
Active/Disable Silence function. If pushing
bm
more than 2 seconds, the Silence function will
bn be activated, pushing more than 2 seconds
again to disable.
bo
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and create a quiet and comfortable room
for you. Due to low frequency operation of
compressor, it may result in insufficient
cooling and heating capacity.
The Silence function can only be activated
during the heating operation (only when the
setting mode is HEAT). The unit will operate
at a setting temperature of 46º F. The display
window of the indoor unit will display FP.
Pressing the buttons ON/OFF, SLEEP, SILENCE/FP,
MODE, FAN SPEED, UP or DOWN while
operating will cancel the Silence function.
9 TIMER ON BUTTON
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-timed
setting 60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-on time to 0.0.
4
)
)
NOTE:
NOTE: