How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation - Ideal Air DUAL MINI-SPLIT Manual

HOW TO USE THE BUTTONS

3
ON/OFF
1
MODE
TEMP
FAN
SLEEP
TURBO SELF
CLEAN
4
ON/OFF
1
MODE
TEMP
3
FAN
SLEEP
TURBO SELF
CLEAN
2
SILENCE
FP
TIMER
ON
TIMER
OFF
SWING DIRECT
LED FOLLOW
ME
2
SILENCE
FP
TIMER
ON
TIMER
OFF
SWING DIRECT
LED FOLLOW
ME

AUTO OPERATION

Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts flashing.
1. Press the MODE button to select AUTO.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 62º F~86º F in 1º F
increments.
3. Press the ON/OFF button to start the air
conditioner.
1. In the AUTO mode, the air conditioner can
logically choose the mode of cooling, fan,
and heating by sensing the difference
between the actual ambient room
temperature and the setting temperature
on the remote control.
2. In the AUTO mode, you cannot switch the
fan speed. It has already been automatically
controlled.
3. If the AUTO mode is not comfortable for
you, the desired mode can be selected
manually.

COOLING/HEATING/FAN OPERATION

Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL,
HEAT (cooling and heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 62º F~86º F in 1º F
increments.
3. Press the FAN button to select the fan speed
in four steps - AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the air
conditioner.
In the FAN mode, the temperature is not
displayed on the remote controller and
you are not able to control the room
temperature either. In this case, only step
1, 3 and 4 may be performed.
7
NOTE:
NOTE: