Blaupunkt TBG701 Owner's Manual page 7

TBG701
1. Base with motor
2. Rotor
3. Blender's jar (a – blades, b – seal,
c – glass jar)
4. Lid
BEFORE FIRST USE
1. Remove all papers, cartons, foil which secure the blender and blender's parts.
2. Clean the blender following the advice in Cleaning and Maintenance chapter.
FOOD PREPARATION
Remove stones (plums, peaches, cherries etc).
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
Soft-skinned and other foods just need washing.
Cut the food into small pieces (2-3 cm).
USING THE BLENDER
Place a blender cup (3) on the the main unit (1), fit the rotor (2) to the coupling of knives in the bottom
of the blender cup. Put the ingredients into the cup. Pour some water. It is recommended not to fill
more than ¾ cup's capacity. Cover the cup with a lid (4).
Note: the blender jar need to be hold during operation.
Plug the blender to the mains.
To select one of the three automatic programs, set the knob (7) to position "P", then press one of the
automatic programs (8): smoothie, ice crushing, interval mode. Otherwise, set the speed of the
blender's control knob (7) and press the "start" button.
To turn off the blender, press the start button.
When the ingredients will become the right consistency, turn off the device. Do not operate the
blender for more than 3 minutes. Wait 30 minutes before the next run.
After operation, pull out the plug from the electric socket.
CLEANING AND MAINTENANCE
Make sure that the blender is disconnected from the power supply.
The body may be wiped with lightly dampened cloth, then wipe it dry. Do not immerse the body in
water and other liquids.
All the dismountable parts (excluding base with motor) can be washed with dishwashing liquid or in
the dishwasher machine.
5. Small lid
6. „Start" button
7. Control knob of automate
programs or speed setting
8. Automate programs buttons
5