Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0840
DELL 12" TABLET DOCKING STATION
This instruction sheet is for the Dell 12" Tablet docking station only. For instructions
on features, set-up, and operation of the computer, please refer to the manual
provided by Dell with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson
mounting systems. Installation instructions for other Gamber-Johnson products
are provided with each individual product.
This instruction sheet is for the following products:
Item No. 7160-0840-00 No RF (External Power Supply sold separately)
Item No. 7160-0840-02 Dual RF (External Power Supply sold separately)
Dell recommends using a Lind Auto Adapter to power the docking station. It can
be ordered from Gamber-Johnson (Item No. 16710 for vehicles)(Item No. 16793,
16794, 16795 for fork lifts). The vehicle power supply may be included with GJ Kits.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
Rev. A
Printing Spec: PS-001
Form
INST-748
1 / 5
Advertisement
Related Manuals for Gamber Johnson 7160-0840-00
Summary of Contents for Gamber Johnson 7160-0840-00
-
Page 1: Installation Instructions
This instruction sheet is for the following products: Item No. 7160-0840-00 No RF (External Power Supply sold separately) Item No. 7160-0840-02 Dual RF (External Power Supply sold separately) Dell recommends using a Lind Auto Adapter to power the docking station. It can be ordered from Gamber-Johnson (Item No. -
Page 2: Pre-Installation Recommendations
PRE-INSTALLATION RECOMMENDATIONS Conduct a "Bench Test" Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation: Make sure the computer is operational by itself. Insert computer into the docking station and verify that the computer is operating in the dock. - Page 3 DELL 12" TABLET DOCK FEATURE IDENTIFICATION Barrel Key Lock Un-Latch Button (User Interface) Upper Side Walls Provides docking guidance Finger Print Scanner and connector protection, Access prevents mis-docking Lower Side Walls AUX/Microphone USB 2.0 Guide Pins Dual RF Connector (Optional) Front Walls Docking Connector Provides docking guidance...
- Page 4 DOCKING AND UNDOCKING THE COMPUTER TO DOCK THE COMPUTER 1. Insert the bottom of the tablet into the bottom cavity of the dock. The walls on the dock will guide the tablet into place as the top of the tablet is angled outside of the dock. 2.
- Page 5 Regulatory Certification Information Regulatory Model #: 7160-0840 GJ Model #'s & Description: 7160-0840-00 Dock-Dell-12" Tablet-No RF 7160-0840-02 Dock-Dell-12" Tablet-Dual RF Certifications: • EN 55032: 2012/AC: 2013 Class A • EN 50498:2010 • EN 50581:2012 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.