Download Print this page

Gamber Johnson 7160-0840-00 Installation Instructions page 4

Dell 12 inch tablet docking station

Advertisement

DOCKING AND UNDOCKING THE COMPUTER
TO DOCK THE COMPUTER
1. Insert the bottom of the tablet into the bottom cavity of the dock. The walls on the dock
will guide the tablet into place as the top of the tablet is angled outside of the dock.
2. Rotate the top of the tablet into the dock, overcoming the resistance until the Latch Button
returns to the "Latched" position. The grooves on the button line up with the lower groove on
the dock. There will also be an audible confirmation as the latch system springs downward.
3. With the dock in the "Latched" position, turn the lock to the "LOCKED" position (Clockwise).
Dock "Latched"
TO UNDOCK THE COMPUTER
1. Turn the lock to the "UNLOCKED" position (Counter Clockwise).
2. With your hand on the top of the tablet, use the thumb to push up on the blue button until
the dock is in the "Un-Latched" position and pull the top of the tablet forward. The grooves on
the button now line up with the upper groove on the dock (or higher).
3. After the tablet clears the latching system, remove the tablet by pulling it away from the
dock.
Dock "Un-Latched"
4 / 5

Advertisement

loading

This manual is also suitable for:

7160-0840-02