Table of Contents
Advertisement
Access To The Terminals - Frame Sizes 6
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Read and understand the instructions in Safety Information chapter before performing any procedure
in this chapter.
Failure to follow these instructions will result in death or serious injury.
Apply the following instructions to access control terminals on frame sizes 6 drives
Step
Cabling plate preparation
NOTE: Cabling plate shown is for frame size 3. Other cabling plates look slightly differs from this one.
Apply the following instructions before connecting the power cables to the drive
Step
EAV64301 01/2015
Action
1
Unscrew the 6 screws attaching the from bottom front cover and remove it
2
Remove the terminal cover
Action
1
Unscrew the cable grommet (C) screws (D) if required
2
Insert power input cables in drilling (A)
3
Insert motor power cables in drilling (B)
4
Screw back the cable grommet screws
DANGER
77
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ATV630 and is the answer not in the manual?