Epg; Super Eco Mode; Colour Adjustment And Still Image; Teletext Function - Sharp AQUOS LC-40SA5200X Operation Manual

EPG

What is an EPG?
An "EPG (Electronic Programme Guide)" is a
programme schedule, which is displayed on the TV
screen. The EPG is broadcasted together with DTV.
The TV screen shows the EPG when the viewer
presses EPG on the remote control, provided that
the TV is receiving the digital broadcasting signal.
The EPG enables you to search for a programme, do
timer view the programme schedule in detail.
Basic Operation
H Display the EPG screen
1 Press EPG.
2 Press a /b to select different programme time
information.
3 Press c / d to change the day selection.
H Close the EPG screen
4 Press EPG again or RETURN to exit.
Reminder timer setting
You can schedule a reminder for future programmes.
Channel will automatically change on time as
scheduled.
1
Press EPG.
2
Press a /b to select the programme you want
to watch.
3
Press R to set reminder time.
4
Press ENTER to save reminder timer.
• "Timer save success" will display.
NOTE
• "Timer overlay" will display if same time is set twice.
• "Timer past" will display if past time is set.
5
Press Y to display the reminder schedule list.
6
Press RETURN or EPG to exit.
LC-40_50SA5200X_G870_EN.indd 12
Viewing the reminder schedule list
1
Press EPG.
2
Press Y to display the reminder schedule list.
3
Press a /b to display next or previous screen.
4
Press RETURN or EPG to exit.
Cancelling the reminder timer setting
1
Press EPG.
2
Press Y to display the reminder schedule list.
3
Press a /b to select a programme you want to
cancel.
4
Press R to delete a programme from reminder
list.
5
Press RETURN or EPG to exit.

SUPER ECO mode

This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item Description
SUPER ECO Reduces the backlight brightness.
ON
SUPER ECO Normal setting of backlight brightness.
OFF
SUPER ECO status will be displayed on the channel
information window.

Colour adjustment and still image

Allows you to adjust the colour tone of a still image.
1
Press COLOUR ADJ. (FREEZE), the moving
image will be captured and colour adjustment
screen displays.
2
Press a /b/ c / d to adjust the colour to your
desired setting.
Button Description
a White with greenish tone.
White with reddish tone.
b
c White with bluish tone.
White with yellowish tone.
d
R Reveal/hide the setting screen.
G Set adjustment to last user setting.
Close the setting screen and unfreeze
B
image.
ENTER Save/exit setting.
NOTE
• The colour adjustment screen and still image will
automatically goes out after 30 minutes.
• Freeze/Colour adjustment function does not work in USB
Photo/Movie playback. It works for HDMI and composite.
23 24

Teletext function

What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.
Turning on and off Teletext
1
Select a TV channel or external input source
providing the Teletext programme.
2
Press m to display the Teletext.
3
Each time you press m , the screen switches
as shown below.
TELETEXT
NOTE
• If you select a programme with no Teletext signal,
"No Teletext available." is displayed.
• The same message displays during other modes if
no Teletext signal is available.
Button functions
Buttons Description
CH ( r / s ) Increase or decrease the page number.
Colour (Red/ You can select a group or block of
Green/
pages displayed in the coloured brackets
Yellow/Blue) at the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control
unit.
0 – 9 Directly select any page from 100 to 899
by using 0 – 9.
k (Reveal To reveal hidden information such as an
hidden for answer to a quiz.
TELETEXT)
3 (Hold) To stop updating Teletext pages
automatically or release the hold mode.
[ (Subtitle Display the subtitle during Teletext page.
for
• Subtitle will not be displayed when the
TELETEXT) service does not contain subtitle information.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
1/15/2018 2:06:36 PM