Adjusting The Tv's Convergence Control - Philips 64PP9751 Directions For Use Manual

RED/BLUE CONVERGENCE
C onvergence is the correct
lining up of the red and blue
light paths on the TV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary for your TV.
1
Select CONVERGENCE
control.
With the PICTURE MENU (2 of
3) on screen, move the RED
highlight with the MENU
buttons. Then press the MENU (or
ok) button to select the feature.
2
If there is RED or BLUE color
fringing (see note below) on your
PTV, press the MENU
buttons to move the highlight.
Press the MENU (or ok) button to
select the Align Red or Align Blue
Convergence control.
3
Press the MENU
to move the red or blue cross
directly over the white cross on the
TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
4
Press the Exit button to clear
the screen when convergence
adjustments are complete.
S H
MART ELP
Remember. Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
P M
ICTURE ENU
PICTURE
FEATURES
1ST TIME SETUP
1
4
buttons
NOTE: Adjustments for
"Multi-Point" on-screen color
fringing can also be made as
part of the TV's Convergence
control system. Follow the TV's
on-screen menu directions to
select individual screen areas that can
be readjusted and set for varying
red/blue color fringing conditions.
These multi-point settings can then be
"Saved" to memory for the specific areas of the TV
screen (or Factory Settings for convergence can be
recalled and put back into place for use).
C (
ONTROLS CONTINUED
MAIN MENU
SOUND
EXIT
mute
DN
channel
HDR PTV
+ +
Menu Source
volume
+ +
ok
Exit
3/5 INFO A/CH
1
2
3
CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK
8
)
PICTURE MENU
COLOR
BRIGHT
SHARP
EXIT
PICTURE MENU
CONVERGENCE
FLESH CORRECTION
VIDEO ENHANCEMENT
EXIT
CONVERGENCE MENU
ALIGN RED
ALIGN BLUE
CONVERGE MULTI POINT
BACK
PRESS TO ALIGN RED
PRESS MENU TO RETURN
MULTI-POINT
CONVERGENCE
CONVERGE RED POINTS
USE TO ADJUST
DIGIT 2, 4, 6, 8 TO MOVE CURSOR
PRESS MENU TO RETURN
PRESS MENU NOW TO CONTINUE
TINT
PICTURE
CLEARVIEW
MORE...
1 OF 3
MORE...
2 OF 3