Philips 64PP9751 Directions For Use Manual page 13

F
EATURE
CHANNEL MEMORY
AUTO-PROGRAMMING
Y
our TV can automatically set itself
for local area (or Cable TV)
channels. This makes it easy for you
to select only the TV stations in your
area when the CHANNEL
buttons are pressed.
NOTE: If you went through First
Time Setup (in your Quick Use
Guide), this task has already been
completed for you.
1
Select CHANNEL MEMORY
(START AUTO-PROGRAMMING)
control.
With the FEATURES MENU (1 of 5)
on screen, move the RED highlight
with the MENU buttons. Then
press the MENU (or ok) button to
select the feature.
2
Press the MENU
select AUTO-PROGRAMMING ON,
then press the Menu (or ok) button to
begin.
The TV shows which channel
numbers are "SAVED" ( ) as they
are added into memory.
"Auto-programming CHANNEL
MEMORY is finished" shows when
the TV is through adding channels.
Press the Exit button to clear the
3
screen.
S H
MART ELP
Try it out. Press the
CHANNEL
and see which channels you can
select.
Remember, an Antenna or Cable
TV signal must first be connected
to your PTV so that channels can
be saved.
If you want to delete any
unwanted channels from the TV's
memory, see "ADD/DELETE
CHANNELS" on the next page.
M C
ENU
PICTURE
FEATURES
1ST TIME SETUP
1
buttons to
3/5
3
buttons
(
ONTROLS CONTINUED
MAIN MENU
SOUND
EXIT
DN
mute
channel
HDR PTV + +
Source
Menu
volume
+ +
ok
Exit
INFO A/CH
1
2
Channel Numbers are
Saved in Memory
13
)
FEATURE MENU
ANALOG
CABLE
FORMAT
TUNING
CLOSED CHANNEL
CAPTIONS
MEMORY
MORE...
EXIT
1 OF 5
CHANNEL MEMORY
ADD/DELETE
CHANNELS
START
AUTO-PROGRAMMING
EXIT
AUTO-PROGRAMMING CHANNEL
MEMORY FOR ANT A
1 2 3 4
5 6 7 8
9 1O 11 12
13 14 15 16
17 18 19 20
21 22 23 24
Press "M" to
Stop Auto-Program