Philips MCM3050 User Manual page 15

Hide thumbs Also See for MCM3050:
Table of Contents

Advertisement

Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated,
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
» When sleep timer is deactivated,
disappears on the display.
Play from an external device
You can also listen to an external audio device
through this unit.
1
Press MP3 LINK to select the MP3 link
source.
2
Connect the supplied MP3 link cable to:
the MP3 LINK connector (3.5mm) on
the unit.
the headphone connector on an
external device.
3
Start to play the device (see the device's
user manual).
Listen through the headphone
Plug headphones (not supplied) into the
connector on the unit.
16
EN
Downloaded From DvDPlayer-Manual.com Philips Manuals
8 Product
information
Note
Product information is subject to change without prior
is
notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output Power
)UHTXHQF\ 5HVSRQVH
Signal to Noise Ratio
MP3 link input
Tuner
Tuning Range
Tuning grid
FM sensitivity
- Mono
Total Harmonic
Distortion
Signal to Noise Ratio
Number of presets
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
2 x 20W RMS
60 Hz - 16 kHz, ±3 dB
>65dBA
500mv, 20kohm
FM: 87.5 - 108 MHz
50 KHz
26 dB
<2%
>55 dB
20 (FM)
8 ohm
2 X 2.5" full range
>82 dB/m/W

Advertisement

Table of Contents
loading

Table of Contents