Philips MPX2 Instructions For Use Manual page 13

2 DETT - Instructions for Use
Start
Ensure that you have connected the IntelliVue monitor to the PC, either via LAN (monitor must have
IP address either via BootP server or manual configuration) or via RS-232.
When using the LAN interface of the PC without a BootP Server in the LAN network (e.g. direct
LAN Connection), the PC must use a valid IP address within the same subnet as the IV.
To start the data export communication select "Start" from the Menu.
By selecting "Start" from the Menu, the DETT detects any available connected IntelliVue Patient
Monitors and displays the received data in the numeric grid. Patient Monitors connected via LAN can
take up to one minute to establish communication.
13