Software Check And Upgrade - Philips BDP3200/51 Service Manual

Software check and upgrade

Preparation to upgrade software
1)Start the CD burning software & create a folder named "UPG_ A L L " ,
2)Then copy the Bin file (BDP3XXXXX-XXX-XXXXXX.bin) into it,
3)Burn the data onto the blank CD.
A. Procedure for software upgrade
A) Upgrade software via Disc
1) Power on the set and insert the prepared Upgrade
CDR.
2) The set will starts reading disc & response with the
following display TV screen:
Now searching for upgrade software!
Please wait...!
3) Then screen will display :
software upgrades for this player has been found!Do you want to upgrade?
Cancel
4) Press Right cursor button to choose "Start", then press <OK>;
5) The software will updagrde and screen will display as below:
Upgrade is ongoing, Please wait...
Please do not unplug or switch off the device.
6) Restart the set.
B) Update software via USB Flash Drive:
1) Go to www.philips.com/support to check if the latest software
version is available for this player.
2) Download the software onto a USB flash drive' s root DIR named "UPG_ A L L " .
3) Insert the USB flash drive to the USB jack of the rear panel.
4) In the Home menu, select <Setup>-<Advanced>-<Software
update>-<USB>.
5) Then press OK
6) you' l l see now searching for new software, please wait.......
7) Waiting, the you' l l see "software for this player has been found ......"
8) Then select "Start" and press "OK"
9) then you' l l see "upgrade is ongoing ......", wait until it ends.
10) Player will restart automatically or press "Restart now" to restart, after restarting the upgrade ends.
1-3
4) In homemenu,enter "setup"->"advanced"->"version info", press "OK"
Model:XXX.XXX
Versions
subinfo:xxxx
Start
B. Read out the software versions to confirm upgrading
and other information will display on the TV screen as below:
system SW:xxxx
ethernet MAC:xxxxxxxx
http://www.philips.com/support
Caution: The set must not be power off during
upgrading, otherwise the Main board will be
damaged entirely.