Table of Contents
Advertisement
Software Upgrade
Disc Upgrade
"Advanced
HOME A"Settings" A
Setup"
You can upgrade the software by using disc.
1) Follow steps 1) to 3) in "Connection Test" on page
46.
2) Use [K / L] to highlight "Software Upgrade", then
press [OK].
3) Use [K / L] to highlight "Disc Upgrade", then press
[OK].
4) Use [K / L] to highlight "Yes", then press [OK].
5) Disc tray will open automatically.
• Insert the disc for software upgrade and then press
[OPEN/CLOSE A].
6) After completing loading disc, confirmation
message will appear. Use [s / B] to highlight "Yes"
and press [OK] to start upgrading.
• It may take a while to complete the upgrading.
7) After the disc upgrade finishes, this unit will restart
and open the disc tray automatically. Remove the
disc.
Note
• Please visit www.philips.com/support to download
the latest firmware version.
• Please do not unplug the AC power cord while
executing the "Disc Upgrade".
• All settings will remain the same even if you upgrade
the firmware version.
Network Upgrade
"Advanced
HOME A"Settings" A
Setup"
You can upgrade the software by connecting the unit to
the Internet.
1) Follow steps 1) to 3) in "Connection Test" on page 46.
2) Use [K / L] to highlight "Software Upgrade", then
press [OK].
3) Use [K / L] to highlight "Network Upgrade", then
press [OK].
4) Use [K / L] to highlight "Yes", then press [OK].
• This unit will then start checking for the latest
firmware version.
5) Confirmation message will appear.
Use [s / B] to highlight "Yes", then press [OK].
• The unit will start downloading the latest firmware
version.
6) When the download completes, confirmation
message will appear. Press [OK].
• The unit will start upgrading the firmware version.
• It may take a while to complete the upgrading.
7) After upgrading finishes, this unit will restart and
open the disc tray automatically.
SETUPS
"Software
"Disc
A "Others" A
A
Upgrade"
Upgrade"
"Software
"Network
A"Others" A
A
Upgrade"
Upgrade"
Note
• Please do not unplug the AC power cord or LAN
cable while executing the "Network Upgrade".
• All settings will remain the same even if you upgrade
the software version.
• The disc tray will open automatically after upgrading
finishes. This is not a malfunction.
Reset to Factory Default
Initialize the setting, SD Memory Card or network setting.
1) Use [K / L] to highlight "Settings" in the home
menu, then press [OK].
2) Use [K / L] to highlight "Factory Default", then
press [OK].
3) Use [K / L] to highlight the desired setting, then
press [OK].
"Settings":
All the settings except for the "Parental" and "Network
Connection" setting will be reset to default.
"Format SD Card" (Available only when an SD
Memory Card is inserted):
Initialize the SD Memory Card.
"Local Storage":
Local storage for Player or SD Card (Available only
when an SD Memory Card is inserted) used for BD-Java
will be initialized.
"Network Settings":
Reset the network setting to the default.
4) Use [K / L] to highlight "Yes", then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
5) Press [BACK U] to go back to the previous screen,
or press [HOME
] to go back to the home menu.
Note
• Do not remove the SD Memory Card while executing
the "Format SD Card" or "Local Storage"(SD Card). It
will damage the card.
• "Format SD Card" and "Local Storage" (SD Card) are
not available when a Blu-ray Disc is in the unit.
EN
49
Advertisement
Table of Contents
