Use Wps With The Pin Method - NETGEAR R6900P User Manual

Nighthawk AC1900 Smart WiFi Router Model R6900P
6.
Either click the button onscreen or press the WPS button on the right side panel of the router.
For two minutes, the router attempts to find the WiFi device (that is, the client) that you want to join the
router's main WiFi network.
During this time, the WiFi LED on the top panel of the router blinks white.
7. Within two minutes, go to the WiFi device and press its WPS button to join the router's main WiFi network
without entering a password.
After the router establishes a WPS connection, the WiFi LED lights solid white and the Add WPS Client
page displays a confirmation message.
8. To verify that the WiFi device is connected to the router's main WiFi network, select BASIC > Attached
Devices.
The WiFi device displays onscreen.

Use WPS With the PIN Method

To use the PIN method to connect a WiFi device to the router's WiFi network, you must know the PIN of
the WiFi device that you are trying to connect.
To let a WiFi device join the router's WiFi network using WPS with the PIN method:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
The page displays a description of the WPS method.
5. Click the Next button.
The Add WPS Client page adjusts.
The Push Button (recommended) radio button is selected by default.
Manage the WiFi Network Settings
137