One-Touch Manual Start And Advance - Hunter X-CORE Owners Manual And Programming Instructions

PROGRAMMING THE CONTROLLER
3. Turn the dial clockwise to the RUN position to run
the station (only the desig-
nated station will water, then the
controller will return to auto-
matic mode with no change to the
previously set program). Also see One - Touch Manual Start and
Advance.
One - Touch Manual Start and Advance
You can also activate all stations to water without using the dial.
1. Hold down the button for 2 seconds.
2. This feature automatically defaults to program A. You can select
24
MANUAL-ONE STATION
1
program B or C by pressing the
3. The station number will be flashing. Press the
through the stations and use the
run times. (If no buttons are pressed for a few seconds during
step 2 or 3, the controller will automatically begin watering).
4. Press the button scroll to the station you wish to begin with.
After a 2 - second pause, the program will begin. At any time
during the manual cycle, you can use the
gate from station to station manually.
button.
button to scroll
or button to adjust station
or buttons to navi-