Clik Delay Instructions - Hunter X-CORE Owners Manual And Programming Instructions

CLIK DELAY INSTRUCTIONS

Clik Delay Feature
This feature allows the user to delay programmed waterings for a
designated period (from 1-7 days) AFTER a Clik Event ends. At the
end of the Programmed Clik Delay period, the controller will resume
normal automatic irrigation.
1. Turn the dial to the RUN Position
2. Press and hold the button for 3 seconds, then turn the
dial to the OFF position
3. Release the button. The display will show the program-
mable Clik Delay.
SENSOR DAYS LEFT
4. Press the button to set Clik Delay duration (from 1 to 7 days).
5. Return the dial to the RUN position. Clik Delay is set.
After a Clik Event ends (rain sensor changes from wet to dry) the
Clik Delay feature will become active and the screen will display Clik
Delay duration. The day countdown will occur 24 hours after the
start of Clik Delay.
SENSOR DAYS LEFT
An active Clik Delay can be cancelled by turning the dial to the OFF
position, waiting for OFF to stop flashing, then turning the dial back
to the RUN position.
Any station that is set to override sensor, as well as Lighting Pro-
grams, will operate during a Clik Delay event.
NOTE: Use caution when using the
programmable Clik Delay feature with Hunter
Wind-Clik®, Freeze-Clik®, Soil- Clik, and freeze
component of Solar Sync and Rain/Freeze Clik as the
Clik Delay will become active AFTER Clik Event from
these devices.
27