Audi A8 2003 Workshop Manual page 43

10-cylinder direct petrol injection engine (5.2 ltr. 4-valve), mechanics - Edition 10.2013
– Unplug electrical connector -arrow- at engine mounting (right-
side).
– Remove bolts -1, 2, 3- and detach engine support with engine
mounting.
– Attach the lifting tackle - 3033- to engine lifting eyes and work‐
shop hoist - VAS 6100- with lift arm extension (workshop hoist)
- VAS 6101- as shown in the illustration.
– Lift engine off the support elements on scissor-type assembly
platform - VAS 6131 A- .
– Using bracket -VAS 6095/1-7- , secure engine to engine and
gearbox support - VAS 6095- as shown in the illustration.
Tightening torque: 42 Nm.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3. Securing engine to engine and gearbox support
Audi A8 2003 ➤
37