Use Wps For Wireless Connection; Set The Router's Pin - TP-Link Archer C9 User Manual

Chapter 12
2. Select Hide SSID, and your SSID won't display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
¾ To change the security option:
1. Go to Advanced >
2. Select the wireless network
3. Select an option from the
the default settings unless necessary. If you select other options, configure the
related parameters according to the help page.
In addition
• Mode - Select a transmission mode according to your wireless client devices. It is
recommended to just leave it as default.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
• Transmit Power - Select either High,
The default and recommended setting is High.

12. 7. Use WPS for Wireless Connection

Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >

12. 7. 1. Set the Router's PIN

Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
• If you want to enable/disable the WPS feature, go to
Enable WPS checkbox.
Wireless > Wireless Settings.
2.4GHz or 5GHz.
Security drop-down list. We recommend you don't change
Middle
Wireless > WPS.
Customize Your Network Settings
or Low to specify the data transmit power.
System Tools > System Parameters > WPS, tick or untick the
72