Table of Contents
Advertisement
of the root router is 192.168.0.1, the IP address of the extended router can be
192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)
2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to
Advanced
2.4GHz
and untick the
2 ) Go to
Advanced
Wireless
section, click
3 ) Click Survey, locate the root router's SSID and click
TP-Link_4F98 as example).
4 ) If the root router has wireless password, you should enter the wireless password
of the root router.
5 ) Click Save.
4. Disable DHCP:
1 ) Go to
Network
2 ) Deselect
Enable DHCP Server
Now you can go to
Advanced
WDS status
is Run, it means WDS bridging is successfully built.
Q5. What should I do if I cannot access the internet even though the
>
Guest Network
Enable Guest Network
>
System Tools
>
System Parameters
Enable WDS
>
DHCP
Server.
and click Save.
>
Status
>
Wireless
and focus on the
Wireless
checkbox.
and focus on the
Bridging.
Choose
to check the WDS status. When the
section. Click
2.4GHz
(Here we take
91
Hide quick links:
Advertisement
Table of Contents
