1070 M.2 Ssd; For Access, Remove These Frus In Order; 1010 Thinkpad Pen Pro Or Dummy Cap - Lenovo Yoga 370 Hardware Maintenance Manual

Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the memory slot. Press the memory module in firmly,
and pivot it downward until it snaps into place. Ensure that the memory module is firmly installed in the
slot and does not move easily.

1070 M.2 SSD

For access, remove these FRUs in order:

• "1010 ThinkPad Pen Pro or dummy cap" on page 58
• "1020 Micro-SIM-card tray (available on some models)" on page 59
• "1030 Base cover assembly" on page 59
• Disconnect the battery cable. See "1040 Battery" on page 60.
Removal steps of the M.2 SSD
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Incorrect
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or is in suspend mode.
• Ensure that you partition the M.2 SSD after installing it on the computer you are servicing. Otherwise, the
M.2 SSD will not function correctly. For instructions on how to partition an M.2 SSD, go to:
http://www.lenovo.com/support/msata-fru
1
1
.
Chapter 8 Removing or replacing a FRU
63