Table of Contents
Advertisement
Available languages
Available languages
Owner's manual
2. Plug the USB cable to a compatible USB computer port or AC
adapter.
3. During charging, a charging icon will be blinking on the screen.
4. When fully charged, all 3 segments of the battery icon will be
displayed
5. Unplug the USB from the computer or AC adapter before di-
sconnecting the clip form the unit
HRM CHEST STRAP BATTERY REPLACEMENT
Open the battery compartment at the back of the strap. Replace
battery with a new one (CR2032). When inserting battery note the
correct polarity (+ positive pole facing the battery cover). Close the
battery compartment cover.
CLEANING
Clean this device with a soft, slightly damp cloth. Do not use any
chemical agents to clean this device (as it may cause permanent
device damage). Make sure not to leave any water drops on this
device, as it may cause permanent discoloration.
Note: Guide on computer software concerning this device is for
download from www.krugermatz.com.
45
Advertisement
Table of Contents
