Kruger&Matz KM0074 Owner's Manual page 30

Once you turn on the GPS, the device will automatically start to search
for a GPS signal. The signal will be indicated by the blinking satellite
symbol in the top left of the display.
Please note, it can take up to 15 minutes from the first start in new
surroundings until the first satellite reception occurs. Then the sa-
tellite symbol appears permanently on the display. The stronger the
signal, the more waves around satellite icon:
Weak reception
If the device has not found a satellite signal within 30 minutes,
the GPS will switch off. Press and hold the MODE button again
to activate GPS again.
2. Press MODE button to switch between different modes.
30
Very good
reception
Owner's manual
Good reception
Best possible
reception