Rear Panel Components - HP EliteDesk 705 G3 Hardware Reference Manual

Rear panel components

Rear panel components
1 PS/2 keyboard connector (purple)
2 DisplayPort monitor connectors
3 VGA monitor connector
4 USB 3.1 ports (blue)
5 USB 3.1 ports (blue)
6 Audio-out jack for powered audio devices (green)
NOTE: An optional second serial port and an optional parallel port are available from HP.
If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wakeup feature. The
wakeup feature is also supported on the PS/2 connector if enabled in BIOS F10 Setup.
When a device is plugged into the microphone/headphone jack, a dialog box will pop up asking if you want to use the jack for a
microphone or a headphone. You can reconfigure the jack at any time by double-clicking the Audio Manager icon in the
Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the
integrated graphics on the system board may be used. The specific graphics card installed and software configuration will
determine the behavior.
The system board graphics can be disabled by changing settings in BIOS F10 Setup.
7 Power cord connector
8 PS/2 mouse connector (green)
9 Serial port
10 RJ-45 (network) jack
11 USB 2.0 ports (black) with keyboard
wakeup function
12 Audio-in jack (blue)
Rear panel components 3