Removal steps of the dc-in connector with cable
Step
Screw (quantity)
1
M2.5 × 5 mm, wafer-head, nylon-coated (2)
When installing: Ensure that the connector is attached firmly to the system board.
1140 Power button card and dc-in LED card
For access, remove these FRUs in order:
•
"1010 Bottom cover" on page 78
•
"1020 Battery" on page 79
•
"1030 Memory module" on page 79
• "1040 Hard disk drive assembly, solid-state drive assembly, hard disk drive cable, or solid-state drive
cable" on page 81
• "1050 M.2 solid-state drive and M.2 solid-state drive bracket" on page 83
•
"1060 Keyboard" on page 84
•
"1070 Base cover assembly" on page 86
Color
Torque
Black
0.196 Nm
(2 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
99