Troubleshooting - Danby DKC052BSL2DB Owner User Manual

Keg cooler
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

Occasionally, a minor problem may arise, and a service call may not be necessary - use this troubleshooting guide for
a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free
Number for assistance.
PROBLEM
The unit does not operate
Turns on and off frequently
Vibrations
The keg cooler seems to make
too much noise
The door will not close properly •
Tel: 1-800-26-
Not plugged in
The circuit breaker tripped or blown fuse
The room temperature is hotter than normal
The door is open too often
The door is not closed completely
The temperature control is not set correctly
The door gasket does not seal properly
The unit does not have proper clearance
Check that the keg cooler is level
The rattling noise may come from the fl ow of refrigerant, which is
normal
Gurgling, caused by liquid refrigerant cycling is normal
Contraction and expansion of the inside walls may cause pop-
ping and crackling noises
The keg cooler is not level
The keg cooler is not level
The door was reversed and not properly reinstalled
The gasket is dirty
The shelves or stand are out of position
The keg is not properly centered in the unit
The casters are not attached
15
(1-800-263-2629)
POSSIBLE CAUSE

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents