The remote control image shown may differ from the actual product.
(Depending upon country)
Magic Remote and Alkaline Batteries (AA)
ꔈ Contents in this manual may be changed without prior notice due to upgrade of product functions.
1. Installing Batteries
ꔈ Please read this manual carefully.
ꔈ Press the top of the battery cover, slide it back, and lift the cover as
ꔈ To replace batteries, open the battery cover, replace alkaline
batteries (1.5 V, AA) matching
the compartment, and close the battery cover. Be sure to point the
remote control at the remote control sensor on the TV.
ꔈ To remove the batteries, perform the installation actions in reverse.
Don't mix old or used batteries with new ones. Close the cover
ꔈ Open the battery cover to find the label.
ꔈ After replacement of the batteries, pair the remote control and use it in accordance with user manual.
ꔈ If the unit does not operate after replacement of batteries, reattempt pairing in accordance with the user
ꔈ If the remote controller is not being used for prolonged period of time, remove the batteries from the unit.
ꔈ Do not dismantle or expose the batteries to heat.
ꔈ Do not drop or exert extreme impact on the batteries. This may cause the case to be damaged.
ꔈ Do not immerse the batteries in water.
ꔈ There is danger of explosion if batteries are inserted incorrectly.
ꔈ Properly dispose of used batteries.
ends to the label inside