Mini-ITX Mainboard Manual
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
For this function to work, you may need a LAN add-on card which
supports the Wake on LAN function. Set the Wake on LAN (WOL)
jumper on motherboard to enable if applicable.
The Choices: Disabled (Default) / Enabled
RTC Alarm Resume
When "Enabled", you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices: Disabled (Default) / Enabled
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when "RTC Resume" is set to "Enabled".
Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up.
This field is only configurable when "RTC Resume" is set to "Enabled".
48