Samsung SBB-SS08E User Manual page 23

Input source control
• Function
The input source of a product can be changed using a PC.
• Viewing input source state (Get Input Source Status)
Header Command ID
0xAA 0x14
• Setting the input source (Set Input Source)
Header Command ID
0xAA 0x14
"Input Source": An input source code to be set on a product.
0x0C Input source
0x08 Component
0x20 MagicInfo
0x1F DVI_video
0x21 HDMI1
0x22 HDMI1_PC
0x23 HDMI2
0x24 HDMI2_PC
― DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to
"Get" commands.
― This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
―
MagicInfo is only available with models that contain the
Data length Checksum
0
Data length Data
1 "Input Source"
MagicInfo function.
• Ack
Header Command
0xAA 0xFF
"Input Source": An input source code to be set on a product.
• Nak
Header Command
0xAA 0xFF
Checksum
"ERR" : A code showing what error has occurred.
ID Data length Ack/Nak r-CMD
3 'A' 0x14
ID Data length Ack/Nak r-CMD
3 'N' 0x14
Val1 Checksum
"Input
Source"
Val1 Checksum
"ERR"
23