Connect Mouse - Q-See QTN8019B Quick Start Manual

Option B: VGA Monitor
B1. Plug a VGA cable (not included) into the NVR's VGA
port. VGA might not support full high definition output.
B2. Connect the other end of the VGA cable to the
monitor. A 19" monitor or larger with 1280 x 1024
resolution is highly recommended.
B3. Plug the monitor into a surge protector.
19" Monitor
or Larger
Step 4: Connect Mouse
Plug the included mouse into the USB port on the back
of the NVR. If your model has two USB ports on the
back, either one will work.
7