Installation Of Indoor Unit - Mitsubishi Heavy Industries SRK10CNV Technical Manual

Limitations for one way piping length and vertical height difference
One way piping length ( )
Outdoor
unit is lower
Vertical height
Outdoor unit
difference (h)
is higher

Installation of indoor unit

Installation of installation board
Look for the inside wall structures (Intersediate support or
pillar and firaly install the unit after level surface has been
checked.)
Mating mark for level surface
• Adjustment of the installation board in the horizontal
direction is to be conducted with five screws in a
temporary tightened state.
Standard hole
• Adjust so that board will be level by turning
the board with the standard hole as the center.
15 m
5 m
5 m
450
Space for
* Leave extra space on the right side to enable removal of the lid screw.
-
INSTALLATION SPACE (INDOOR UNIT)
Indoor unit
service
50
Installation board
138 450
206.5 450
102.5
585
53.5
Piping for Gas 380.6
Piping for Liquid 448.6
Drain hose 520( 16)
Piping hole( 65)
0
-
'14•SRK-T-153
(FRONT VIEW)
Unit : mm
Space for
service
100
202
133.5
102.5
53.5
Piping hole( 65)