• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets. • Use only the power cords included with this product. • Avoid temperatures exceeding 140° F (will cause equipment failure). VXi BlueParrott Point User Guide PAGE 3 ®...
• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light will flash). • Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light will flash). VXi BlueParrott Point User Guide PAGE 5 ®...
Operation While Using the Charger/Adapter The Point headset should be operated from battery power only. If you connect the headset to a charger while it is turned on, it will reset and shut off. To turn it back on again, first unplug the headset from the USB charging cord, slide the switch to the “off”...
3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions. 4. Select “VXi Point” to pair. (Passcode is “0000” if needed.) 5. When connected, the headset will give you the voice prompt, “Your headset is connected” and the indicator light will flash blue.
® GETTING STARTED (continued) When wearing your Point, adjust the fit by rotating the ear bud so that the stabilizer loop (if applicable) presses against the back curve of your ear. Make sure that the boom is pointing towards the corner of your mouth.
The Point will monitor both phones and enable you to answer a call on either one from the headset. If you are on a call and the other device receives a call, you will hear a notification in the headset.
(continued) v. Muting The Point can be muted while on a call by pressing and holding the Volume Up button for 1-2 seconds. A single tone will sound as mute is engaged. To unmute, press and hold the button again for 1-2 seconds.
3. If you are not ready to pair the headset with a device, power it off. The pairing memory is now clear and will need to be paired to any desired devices before it can be used with them. VXi BlueParrott Point...
& Volume Down (quick press) Establish Service MFB (quick press) Fast blue flash 1 long tone “ Your headset Level Connection is connected” VXi BlueParrott Point User Guide PAGE 19 ® FUNCTIONS & INDICATORS TABLES (continued) In-Call Functions Function Button/Duration...
Need help?
Do you have a question about the Point and is the answer not in the manual?
Questions and answers