Video Mode - Denon AVR-X2400H Owner's Manual

Contents Connections
o Video Mode
Configure the video processing method to match the type of video
content.
Auto
(Default):
Game:
Movie:
Bypass:
0 If "Video Mode" is set to "Auto", the mode is switched according to the input
contents.
0 Information displays such as the volume bar cannot be overlaid with the video
signal when "Video Mode" is set to "Bypass".
0 This item can be set when "HDMI" is assigned for each input source.
Front panel Display
Playback
Process video automatically based on
the HDMI content information.
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Perform image processing that is suitable
for contents other than games.
Remove all video processing from the
HDMI video path.
Rear panel
Settings
o i/p Scaler
Set the video input signal to be subjected to i/p Scaler processing.
i/p Scaler will convert the resolution of the input video signal to the
value set in "Resolution". (v p. 161)
On:
Off:
0 This item can be set when "HDMI" is assigned for each input source.
0 This item can be set when "Video Mode" is set to anything other than
"Bypass". (v p. 160)
0 This function is not effective when the input signal is "x.v.Color", 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color or computer resolutions.
160
Remote
Tips Appendix
Use i/p Scaler function.
Do not use i/p Scaler function.
Index