Frequently Asked Questions - Spinning Studio Console Owner's Manual

Frequently Asked Questions

Which heart rate belts work with the Spinning
Any ANT+ compatible heart rate belt will work with this console, and pairing
to an ANT+ belt will prevent any heart rate "crosstalk". Any analog 5.3 KHz
heart rate belt such as Polar® Wearlink
We recommend the Spinning Connect
console as well as BLE-receiving smart phones.
What if the console is not picking up my heart rate?
• Make sure that the belt fits securely at the bottom of your ribcage
and that the sensors are slightly moistened.
• The battery in the belt may be low. Try another strap or replace the
battery/batteries inside your heart rate belt to facilitate pairing.
• Try using the Heart Rate Pairing button in the lower left for manual
pairing with the console. For ANT+ chest straps, the displayed code
will be alphanumeric. For analog belts, the code will be 4-digits and
displayed as 0000.
• Check your distance from the console during syncing.
Make sure you are 30 cm (12 inches) or less from the console.
• Press Heart Rate Pairing to start a new pairing process and delete
the existing relationship. If the process does not complete, the
previous pairing relationship will be lost.
SPIN N IN G® ST U DIO CO N SO L E OWN ER S M AN UAL
will also pair with the this console.
tm
heart rate belt, as it will pair with this
tm
Studio Console?
®
23