Special Test Program (Including Qv-770 Built In Rom); Battery Check - Casio QV-770 Service Manual

2. Special test program (including QV-770 Built in ROM)

(1) Turn power on at REC mode, then press "Mode" button twice and change to "Serial Recording mode"
then turn power OFF.
(2) Turn power on while pressing "DISP" button and "SHUTTER" button.
(3) "WELCOME!" appears on the display followed by TEST MODE display.
TEST MODE
(4) Press "MODE" button twice, then press "MENU" button and "Tran-P" button simultaneously to display
the special program menu.
STROBE ADJUST
DEFECT CORRECT

BATTERY CHECK

KEY CHECK
LAST MEMORY SET
(5) Press "–" button and "+" to select. Press "SHUTTER" button to execute the test.
Note: • Refer to "1-3. Strobe adjust".
• Refer to "1-2. Defect correct".
Battery check
• Used when measuring battery life.
(1) After selecting Battery check set intervals for taking pictures. (Maximum 30 seconds)
(2) Press shutter button to enter "REC" mode. In this you can select Flash, or flash off or flash AUTO.
TOTAL SHOT
Notes: • TOTAL SHOT numbers will not remain in memory. (When batteries go dead they are deleted).
• Timers stop while WAIT is displayed. (1 shot takes 10 seconds). Does not mean 6 shots in one
minute. Actually about 5.5 shots in one minut.
98030401
ADJ01.60
PTPXX.XX
1
— 12 —
ROM version
ADJ version
patch soft version
Number of pictures taken.