Table of Contents
Advertisement
23. Insert the external microphone.
24. It changes into the external-microphone.
It confirmed that the file no. advances.
25. Record a sound source signal (L: 400Hz, R: 1kHz/1mV) from external microphone.
26. Press the [REW] switch.
27. Check the display of LCD is displayed as shown below.
(The File No. is displayed)
· Note: Please delete everything and start over from scratch when the number of files is different.
28. Remove the external microphone.
29. Press the [VOL -] switch.
The sound recorded by item.17 is reproduced.(Vol.:max.)
30. The time counter of LCD advances and it checks that sound comes out from the speaker.
31. Press the [VOL -] switch.
The sound recorded by item.21 is reproduced.
32. The time counter of LCD advances and it checks that sound comes out from the speaker.
Fig.11
Fig.12
Fig.13
Fig.14
9
RR-US475E
Advertisement
Table of Contents
