Charger Led Functions - Ryobi BCL3620S Original Instructions Manual

CharGer Led FunCtIonS

Led indicator Battery pack
Power Without battery pack
Evaluate Hot battery pack
Evaluate Cold battery pack
Evaluate Deeply discharged
Defective Defective
● If the LED status repeats a second time, try charging a different battery.
● If a different battery charges normally, dispose of the defective pack (see maintenance section).
● If a different battery also indicates "defective," the charger may be defective.
Charging Fast charging
Full —
Battery paCk Led IndICatIon deSCrIptIonS
Off Off
Off Off
Off Flashing
Flashing On
On On
Off Off
6
Led
Red Green
On /
Flashing /
Flashing /
Flashing /
Flashing Flashing
/ Flashing
/ On
Off Flashing In charging process, battery pack capacity is lower than 25%
Flashing On In charging process, battery pack capacity is between 25% and 50%.
On On In charging process, battery pack capacity is between 50% and 75%.
On On In charging process, battery pack capacity is between 75% and 100%.
On On Fully charged
One minute after full charge, all LEDs on the battery are off, charger LED
Off Off
is on with green color.
action
Ready to charge battery pack.
When battery pack reaches cooled temperature, charger
begins fast charge mode.
When battery pack reaches warmed temperature, charger
begins fast charge mode.
Charger pre-charges battery until normal voltage is reached,
then begins fast charge mode.
Battery pack or charger is defective.
—
Fast charging is complete; charger maintains charge mode.
Status