Page 1
BCS618 18 VOLT NICKEL-CADMIUM/ LITHIUM-ION 6 PORT CHARGER OPERATORS INSTRUCTION MANUAL N197...
Page 2
DESCRIPTION (See Figures 1-3) BCS618 6-port charger "Key hole" hanger Battery port Screwdriver Blue LED (EnergyStar) power save button 10. Screws Battery port LEDs 11. Pencil Protective bumper 12. Green LED Carry handle 13. Red LED Mounting bracket 14. Charge indicator label 222 mm Fig.1...
English If the power cord is damaged, it must be replaced by SAFETY INSTRUCTIONS an Authorised Service Center in order to avoid hazard. CAUTION When using the battery charger, the following WARNING basic safety precautions should be observed for D o n o t r e c h a r g e p r i m a r y c e l l s ( n o n - protection against electric shock, danger of injury rechargeable).
LED on the front packs at peak charge every time (not over time). of the charger comes on. Note: The charger will also charge Ryobi One+ 18 V CAUTION: Ni-Cd battery packs. Charge in a well-ventilated area. Do not block...
Page 5
English CHARGING A COOL BATTERY PACK BLUE LED (ENERGYSTAR) STATUS BUTTON If the charger does not charge the battery pack under Charger has blue LED status button to indicate power on. normal circumstances, return both the battery pack and charger to your nearest Authorised Service Center for BLUE LED STATUS BUTTON electrical check.
English LED FUNCTIONS OF CHARGER See Fig. 4. LED FUNCTIONS BATTERY PACK RED LED GREEN LED ACTION Power Without battery pack Ready to charge battery pack. Evaluate Hot battery pack Flashing When battery pack reaches cooled temperature, charger begins fast charge mode. Cold battery pack Flashing When battery pack reaches warmed temperature, charger begins fast charge mode.
Need help?
Do you have a question about the BCS618 and is the answer not in the manual?
Questions and answers