Do you have a question about the BCL3617S and is the answer not in the manual?
Questions and answers
Michael Oliver
January 20, 2025
How do you check the fuse in a bcl 3617s charger? Does the power light come on when power is on and no battery inserted.
1 comments:
Mr. Anderson
May 14, 2025
The Ryobi BCL3617S charger uses a time-lag type fuse, but the document does not provide specific steps for checking the fuse. Yes, the power light (green LED) turns on when the charger is powered without a battery inserted, indicating it is ready to charge.
Page 1
ORIGINAL INSTRUCTIONS 36 Volt Lithium-ion Battery Charger BCL3617S...
Page 2
Important! The product is not intended to be used or cleaned by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given instructions concerning the safe use of the appliance by a person legally responsible for their safety.
Safety, performance, and dependability have been given conductive, such as, metallic particles from grinding, top priority in the design of your battery charger. cutting, or machining processes. ■ Remove the plug of the product from the power socket INTENDED USE when it is not in use or when cleaning it.
They contain chemicals that can damage, weaken, or destroy plastic. ■ If you are experiencing any issues with this product or any other RYOBI product, please contact RYOBI Customer Service. WARNING Hazardous voltages are present within the product; do not disassemble.
KNOW YOUR PRODUCT Time-lag type fuse See fig.1 1. BCL3617S Charger 2. Battery port 3. Power cord (from power adaptor BCL3617S) Indoor use only SYMBOLS ON THE PRODUCT Some of the following symbols may be used on this product. Recycle unwanted Study them and learn their meaning.
CHARGER LED FUNCTIONS LED indicator Battery pack Action Orange Green Power Without battery pack On Ready to charge battery pack. When battery pack reaches cooled temperature, charger Hot battery pack begins fast charge mode. When battery pack reaches warmed temperature, charger Evaluate Cold battery pack begins fast charge mode.
Page 11
If you are experiencing any issues with this product or any other RYOBI product, please contact RYOBI customer service or visit your local retailer. AUS: 1300-697-9624 NZ: 0800-279-234 www.ryobi.com.au www.ryobi.co.nz...
Page 12
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, RYOBI is a trademark of Ryobi Limited, Highbrook, Auckland 2013, New Zealand and is used under license. 960324018-01...
Need help?
Do you have a question about the BCL3617S and is the answer not in the manual?
Questions and answers
How do you check the fuse in a bcl 3617s charger? Does the power light come on when power is on and no battery inserted.
The Ryobi BCL3617S charger uses a time-lag type fuse, but the document does not provide specific steps for checking the fuse. Yes, the power light (green LED) turns on when the charger is powered without a battery inserted, indicating it is ready to charge.
This answer is automatically generated