Table of Contents
Advertisement
1. Intended use
The fresh-r
On-The-Wall is a decentral ventilation unit with heat recovery. The fresh-r
®
heat from the stale air it expells and uses it to warm up the fresh air it brings in from outside.
It improves air quality for a healthy indoor air quality and at the same time reduces your energy
bill. No ducting is needed for this unit, which makes installation easier than a conventional HRV
system. The fresh-r
®
control system and other than conventional HRV's the fresh-r
temperatures.
The fresh-r
On-The-Wall may only be installed on a wall.
®
2. Target group
The manual describes how to install the fresh-r
who are familiar with local building regulations.
Connecting the fresh-r
3. Symbols used in this manual
3.1 Safety symbols
DANGER
WARNING
CAUTION
NOTICE
3.2 Other symbols
CE marking: This is the CE logo indicating that the fresh-r
requirements.
4
is equipped with CO ² , RH and temperature sensors and has an intelligent
to the mains electricity supply must be done by a qualified electrician.
®
Indicates an immediate risk of irreversible injury or death when
not observed.
Indicates a risk of severe personal injury and/or serious damage
to the product if the procedures are not followed carefully.
Indicates that the product may be damaged if the procedures are
not followed carefully.
Alerts the user to additional information and possible problems.
also works efficient at sub zero
®
. The installation must be done by contractors
®
takes
®
meets the legal
®
Advertisement
Table of Contents
