Table of Contents
Advertisement
8. Connect the fresh-r
By connecting the fresh-r
also have access to data graphs showing actual performance values of the air temperature and
quality.
To connect your fresh-r
1.
Switch power of the the fresh-r
Wait for 30 seconds.
2.
Press the middle button (increase fan speed) for approximately 5 seconds until you
hear a beep. Then wait 10 seconds.
3.
Press the lower button (decrease fan speed) for approximately 5 seconds until you
hear a beep - the WiFi chip is now in access point mode.
The following actions must be done with your smartphone, laptop or tablet.
Do the following:
4.
Start your device and go to settings.
5.
Select WiFi.
6.
Select WiFly-EZX-XX from the list of WiFi connections.
Your device will now connect to the fresh-r
7.
Open an internet browser, for example Google chrome.
8.
Type
192.168.1.1
The Microchip settings page opens.
9.
Select the Network cfg tab.
20
to the internet you will benefit from automatic sotware updates. You will
®
to the internet do the following.
®
and confirm.
to the internet
®
OFF and switch the power ON again.
®
WiFi.
®
Advertisement
Table of Contents
