Specifications - ADC Kentrox 78220 Operator's Manual

Specifications

Line Rate
Framing
Line Code
Bit Stuffing
Input Signal
Output Signal
Bit Rate
Electrical
DC Power
AC Power
Stand-Alone Size (with feet)
Stand-Alone Size (without feet)
Weight
12-slot Chassis Size
Operating Temperature
Relative Humidity
Remote Loop Back Code Compatibility
Line Loop Back
Data Port Loop Back
Payload Loop Back
*Remote loop backs can be reset by toggling the D-SERV front panel loop back switch.
Network Interface
Data Port Interface
Power
Mechanical Specifications
Environmental
Compatibility
AT&T 62411
AT&T 54016
ANSI T1.403
Inband — Set LLB (10000) Reset (100)*
Operator's Manual
T1 (1.544Mbit/s)
SF/ESF (selectable)
AMI/B8ZS (selectable)
Enable/Disable 15 zero suppression
DSX-1 from 0dB to -27dB Typical
DSX-1 with LBO 0
N x 56 kbit/s or N x 64 kbit/s
(N= 1 through 24)
V.35 or EIA-530 (RS-422/449)
22 to 56 VDC, 6 W
105 to 130 VAC, 57 to 63 Hz, 8 W
1.93" high x 8.35" wide x 12.0" deep
1.6" high x 8.0" wide x 12.0" deep
2.47 lb.
7.0" high x 17.0" wide x 12.0" deep
0-50° C
5% to 95% RH
Out-of-Band — T1.403 codes*
Inband — Set DPLB (127 code)
Reset (inverted 127 code)*
Out-of-Band —TR 54016 or
T1.403 codes*
3