Setting The Record Mode - Native Instruments MASCHINE JAM Manual

4. Press the click-pads in the 8x8 matrix to select the amount of bars you want. One click-
pad equals one bar.
5. Press the SONG button to exit Pattern Length mode.
The Pattern Length is adjusted, and can be readjusted at any time by repeating the same
→
procedure.
7.1.4

Setting the Record Mode

The Record mode options allow you to configure the Metronome, Count-In Length, and Quan-
tize mode via the on-screen overlay.
On your controller do the following to access the Record mode options:
Recording and Editing Patterns
Setting Recording Options
MASCHINE JAM - Manual - 74